FBMJ4516HM900 [TAIYO YUDEN]
Passive Filter;型号: | FBMJ4516HM900 |
厂家: | TAIYO YUDEN (U.S.A.), INC |
描述: | Passive Filter |
文件: | 总12页 (文件大小:877K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Notice for TAIYO YUDEN productsꢀ
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2010. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-
rating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called“TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-
cur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and For-
eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
notice_e-01
(
)
RECTANGULAR FERRITE CHIP BEADS HIGH CURRENT FB SERIES M TYPE
WAVE
REFLOW
■ FEATURES
■ APPLICATIONS
◦Power supply units:
◦Dꢀ eals with power line radiated and conducted noise.
・Withstand large curren(t allowable current: up to 6A)
・Resistance to high energy
・High reliability
◦Pꢀ rovides waveform correction of digital signals and high frequency
noise countermeasures in various types of digital equipment.
◦Aꢀ utomotive
◦There are several variations of the FBMJ type
HS:For broadband applications
HM:For upper MHz range applications
HL :For GHz range applications
◦Cꢀ omputer Peripherals
◦Dꢀ ifferential transmission line on USB and similar products
◦Mꢀ obile devices which require lower power consumption
◦The FBMH type is optimal for circuit designs which require high im-
pedances and large currents to combat radiated noise on power lines,
etc.
■ ORDERING CODE
F B M J 3 2 1 6 H S 8 0 0 - T ○
❶
❷
❸
❹
❺
❻
❼
❽
❾
❹External Dimensions
(L×W)〔mm〕
❺Material code
❼Impedance Tolerance
❽Packaging
Tape & Reel
❶Type
FB Ferrite bead
HS
HM curves for material
difference
ー
N
±25%
±30%
T
Refer to impedance
1608(0603) 1.6×0.8
2125(0805) 2.0×1.25
2012(0805) 2.0×1.25
2016(0806) 2.0×1.6
3216(1206) 3.2×1.6
3225(1210) 3.2×2.5
4516(1806) 4.5×1.6
4525(1810) 4.5×2.5
4532(1812) 4.5×3.2
❷Shape
Rectangular chip
HL
M
❻Nominal Impedance〔Ω〕
❾Internal code
❸Product characteristics
J
example
△
Standard product
Standard type
△=Blank space
330
111
132
33
110
H
High Impedance type
1300
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
Standard Quantity[pcs]
Paper Tape Embossed Tape
Type
L
W
T
e
1.6±0.2
0.8±0.2
0.8±0.2
0.3±0.2
FBMJ1608
(0603)
4000
ー
(0.063±0.008) (0.031±0.008) (0.031±0.008) (0.012±0.008)
2.0±0.2 1.25±0.2 0.85±0.2 0.5±0.3
(0.079±0.008) (0.049±0.008) (0.033±0.008) (0.020±0.012)
3.2±0.3 1.6±0.2 1.1±0.2 0.5±0.3
(0.126±0.012) (0.063±0.008) (0.043±0.008) (0.020±0.012)
4.5±0.3 1.6±0.2 1.1±0.2 0.5±0.3
(0.177±0.012) (0.063±0.008) (0.043±0.008) (0.020±0.012)
1.6±0.1 0.8±0.1 0.8±0.1 0.3±0.15
(0.063±0.004) (0.031±0.004) (0.031±0.004) (0.012±0.006)
2.0±0.2 1.25±0.2 0.85±0.2 0.5±0.3
(0.079±0.008) (0.049±0.008) (0.033±0.008) (0.020±0.012)
2.0±0.2 1.6±0.2 1.6±0.2 0.5±0.3
(0.079±0.008) (0.063±0.008) (0.063±0.008) (0.020±0.012)
3.2±0.3 1.6±0.2 1.6±0.2 0.5±0.3
(0.126±0.012) (0.063±0.008) (0.063±0.008) (0.020±0.012)
3.2±0.3 2.5±0.3 2.5±0.3 0.5±0.3
(0.126±0.012) (0.098±0.012) (0.098±0.012) (0.020±0.012)
4.5±0.3 1.6±0.2 1.6±0.2 0.5±0.3
(0.177±0.012) (0.063±0.008) (0.063±0.008) (0.020±0.012)
FBMJ2125
(0805)
4000
ー
ー
FBMJ3216
(1206)
2000
2000
ー
FBMJ4516
(1806)
ー
FBMH1608
(0603)
4000
4000
ー
FBMH2012
(0805)
ー
FBMH2016
(0806)
2000
2000
1000
2000
1000
FBMH3216
(1206)
ー
FBMH3225
(1210)
ー
FBMH4516
(1806)
ー
4.5±0.4
(0.177±0.016)
4.5±0.4
2.5±0.3
2.5±0.3
0.9±0.6
FBMH4525
(1810)
ー
(0.098±0.012) (0.098±0.012) (0.035±0.024)
3.2±0.3
3.2±0.3
0.9±0.6
FBMH4532
(1812)
ー
2000
(0.177±0.016)
(0.126±0.012)
(0.126±0.012) (0.035±0.024)
Unit:mm(inch)
Recommended Land Pattern Dimensions
Dimensions (mm)
Dimensions (mm)
Parts Number
Parts Number
A
B
C
A
B
C
C
1.4
1.2
2.2
3.5
2.2
3.5
3.5
2.0
2.0
2.0
2.9
2.9
3.7
FB MJ1608 type
FB MJ2125 type
FB MJ3216 type
FB MJ4516 type
FB MH1608 type
FB MH2012 type
1.0
1.4
1.4
1.75
1.0
1.4
1.0
1.2
2.2
3.5
1.0
1.2
1.0
FB MH2016 type
FB MH3216 type
FB MH4516 type
FB MH3225 type
FB MH4525 type
FB MH4532 type
1.4
1.65
2.0
2.0
1.0
B
1.75
1.4
A
A
1.75
1.75
1.65
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
chipbeads01_e-01
104
■ AVAILABLE MATERIALS
●Standard Type
FBMJ1608
FBMJ2125
■
■
HS-type
HM-type
HS-type
HM-type
I max=4A
I max=4A
I max=4~6A
I max=4~6A
FBMJ3216
■
HL-type
HS-type
HM-type
HL-type
70
60
50
40
30
20
10
0
I max=4A
I max=4~6A
I max=4~6A
I max=4.0A
FBMJ4516
■
HS-type
HM-type
HL-type
100
90
80
70
60
50
40
30
20
10
0
I max=4~6A
I max=4~6A
I max=3.5A
●High impedance Type
FBMH1608
FBMH20○○
FBMH32○○
■
■
■
HM-type
HL-type
I max=0.3~3.5A
FBMH45○○
I max=0.3~2.5A
I max=1.8~2.7A
I max=1~3A
■
I max=1.5~4A
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
chipbeads01_e-01
105
■ PART NUMBERS
Standard Type
●FBMJ1608
EHS(Environmental
Measuring
frequency
〔MHz〕
DC Resistance
〔Ω〕max.
Rated current
〔A〕max.
Thickness
〔mm〕(inch)
Ordering code
Hazardous
Impedance〔Ω〕
Substances
)
FB MJ1608HS280NT
FB MJ1608HM230NT
RoHS
28±30%
23±30%
0.8±0.2
(0.031±0.008)
100
0.007
4.0
RoHS
●FBMJ2125
EHS(Environmental
Measuring
frequency
〔MHz〕
DC Resistance
〔Ω〕max.
Rated current
〔A〕max.
Thickness
〔mm〕(inch)
Ordering code
Hazardous
Impedance〔Ω〕
Substances
)
FB MJ2125HS420-T
FB MJ2125HS250NT
FB MJ2125HM330-T
FB MJ2125HM210NT
FB MJ2125HL8R0NT
RoHS
42±25%
25±30%
33±25%
21±30%
8±30%
0.008
0.004
0.008
0.004
0.008
4.0
6.0
4.0
6.0
4.0
RoHS
0.85±0.2
(0.033±0.008)
RoHS
100
RoHS
RoHS
●FBMJ3216
EHS(Environmental
Measuring
frequency
〔MHz〕
DC Resistance
〔Ω〕max.
Rated current
〔A〕max.
Thickness
〔mm〕(inch)
Ordering code
Hazardous
Impedance〔Ω〕
Substances
)
FB MJ3216HS800-T
FB MJ3216HS480NT
FB MJ3216HM600-T
FB MJ3216HM380NT
FB MJ3216HL160NT
RoHS
80±25%
48±30%
60±25%
38±30%
16±30%
0.010
0.005
0.010
0.005
0.012
4.0
6.0
4.0
6.0
4.0
RoHS
1.1±0.2
(0.043±0.008)
RoHS
100
RoHS
RoHS
●FBMJ4516
EHS(Environmental
Measuring
frequency
〔MHz〕
DC Resistance
〔Ω〕max.
Rated current
〔A〕max.
Thickness
〔mm〕(inch)
Ordering code
Hazardous
Impedance〔Ω〕
Substances
)
FB MJ4516HS111-T
FB MJ4516HS720NT
FB MJ4516HM900-T
FB MJ4516HM560NT
FB MJ4516HL230NT
RoHS
110±25%
72±30%
90±25%
56±30%
23±30%
0.014
0.007
0.014
0.007
0.014
4.0
6.0
4.0
6.0
3.5
RoHS
1.1±0.2
(0.043±0.008)
RoHS
100
RoHS
RoHS
High impedance Type
Ordering code
EHS(Environmental
Measuring
frequency
〔MHz〕
DC Resistance
〔Ω〕max.
Rated current
〔A〕max.
Thickness
〔mm〕(inch)
Hazardous
Impedance〔Ω〕
Substances
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
)
FB MH1608HM470-T
FB MH1608HM600-T
FB MH1608HM101-T
FB MH1608HM151-T
FB MH1608HM221-T
FB MH1608HM331-T
FB MH1608HM471-T
FB MH1608HM601-T
FB MH1608HM102-T
FB MH1608HL300-T
FB MH1608HL600-T
FB MH1608HL121-T
FB MH1608HL221-T
FB MH1608HL331-T
FB MH1608HL471-T
FB MH1608HL601-T
FB MH2012HM800-T
FB MH2012HM121-T
FB MH2012HM221-T
FB MH2012HM331-T
FB MH2016HM251NT
FB MH3216HM501NT
FB MH4516HM851NT
FB MH3225HM601NT
FB MH3225HM102NT
FB MH3225HM202NT
FB MH4525HM102NT
FB MH4525HM162NT
FB MH4532HM681-T
FB MH4532HM132-T
FB MH4532HM202-T
47±25%
60±25%
0.020
0.025
0.035
0.050
0.070
0.130
0.150
0.170
0.350
0.028
0.045
0.130
0.170
0.210
0.350
0.450
0.025
0.032
0.060
0.080
0.050
0.070
0.100
0.042
0.100
0.130
0.060
0.130
0.028
0.060
0.130
3.5
3.0
2.0
2.0
1.5
0.9
0.7
0.7
0.5
2.5
1.8
0.9
0.7
0.6
0.5
0.4
2.7
2.5
2.0
1.8
2.0
2.0
1.5
3.0
2.0
1.2
3.0
2.0
4.0
3.0
1.3
100±25%
150±25%
220±25%
330±25%
470±25%
600±25%
1000±25%
30±25%
0.8±0.1
(0.031±0.004)
60±25%
120±25%
220±25%
330±25%
470±25%
600±25%
80±25%
120±25%
220±25%
330±25%
250±30%
500±30%
850±30%
600±30%
1000±30%
2000±30%
1000±30%
1600±30%
680±25%
1300±25%
2000±25%
100
0.85±0.2
(0.033±0.008)
1.6±0.2
(0.063±0.008)
2.5±0.3
(0.098±0.012)
3.2±0.3
(0.126±0.012)
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
chipbeads01_e-01
106
■ ELECTRICAL CHARACTERISTICS
Standard Type
FBMJ1608
FBMJ2125
■
■
FBMJ3216
■
FBMJ3216HL160NT
70
60
50
40
30
20
10
0
FBMJ4516
■
FBMJ4516HL230NT
100
90
80
70
60
50
40
30
20
10
0
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
chipbeads01_e-01
107
■ ELECTRICAL CHARACTERISTICS
High impedance Type
FBMH1608HM470-T
FBMH1608HM600-T
FBMH1608HM101-T
FBMH1608HM151-T
200
180
160
140
120
100
80
200
180
160
140
120
100
80
200
180
160
140
120
100
80
600
500
400
Z
300
200
100
0
R
Z
Z
Z
60
60
60
R
R
X
R
40
40
40
X
X
X
20
20
20
0
0
0
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
FBMH1608HM221-T
FBMH1608HM331-T
FBMH1608HM471-T
FBMH1608HM601-T
600
500
400
600
500
400
1600
1400
1600
1400
1200
1000
800
1200
1000
800
Z
300
200
100
0
300
200
100
0
Z
R
Z
Z
600
600
R
R
R
X
400
200
400
200
X
X
X
0
0
1
10
100
1000
10000
1
10
100
1000 10000
1
10
100
1000
10000
1
10
100
1000
10000
FBMH1608HM102-T
Z
FBMH1608HL300-T
FBMH1608HL600-T
FBMH1608HL121-T
1600
1400
300
250
200
300
250
200
600
500
400
1200
1000
800
Z
R
Z
R
X
150
100
50
150
100
50
300
200
100
0
R
600
X
Z
R
X
400
200
X
0
0
0
1
10
100
1000
10000
10000
10000
1000
1
10
100
1000 10000
1
10
100
1000 10000
1
10
100
1000 10000
FBMH1608HL221-T
FBMH1608HL331-T
FBMH1608HL601
FBMH1608HL471-T
1000
900
1400
1200
1000
2500
2000
1500
1000
500
2000
1800
800
700
1600
1400
R
Z
Z
600
500
400
1200
1000
800
800
600
400
200
Z
Z
R
R
R
300
200
100
600
400
200
X
X
X
X
0
0
0
0
1
10
100
1000
1
10
100
1000
10000
10000
1000
1
10
100
1000
10000
10000
1000
1
10
100
1000
10000
10000
1000
FBMH2012HM800-T
FBMH2012HM121-T
FBMH2012HM221-T
FBMH2012HM331-T
400
350
300
250
200
150
400
350
300
250
200
150
400
350
300
250
200
150
800
600
400
200
0
Z
Z
R
R
X
Z
R
Z
100
50
100
50
100
50
X
R
X
X
0
0
0
1
10
100
1000
1
10
100
1000
1
10
100
1000
1
10
100
1000
FBMH2016HM251NT
FBMH3216HM501NT
FBMH4516HM851NT
FBMH3225HM601NT
800
600
400
200
0
800
600
400
200
0
1200
1000
800
1200
1000
800
R
Z
R
X
Z
600
400
200
600
400
200
R
Z
Z
R
X
X
X
0
0
1
10
100
1
10
100
1
10
100
1
10
100
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
chipbeads01_e-01
108
■ ELECTRICAL CHARACTERISTICS
High impedance Type
FBMH3225HM102NT
FBMH3225HM202NT
FBMH4525HM102NT
FBMH4525HM162NT
1200
1000
800
2500
2000
1500
1000
500
1800
1800
1600
1400
1000
1600
1400
1000
R
1200
800
1200
800
R
Z
600
400
200
Z
R
Z
Z
R
600
400
600
400
X
X
X
X
200
0
200
0
0
0
1
10
100
1000
1
10
100
1000
1
10
100
1000
1
10
100
1000
FBMH4532HM681-T
FBM4532HM132-T
FBM4532HM202-T
1800
1800
2500
2000
1500
1000
500
1600
1400
1000
1600
1400
1000
1200
800
1200
800
Z
R
R
Z
600
400
600
400
Z
R
X
200
0
200
0
X
X
0
1
10
100
1000
1
10
100
1000
1
10
100
1000
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
chipbeads01_e-01
109
■ PACKAGING
①Minimum Quantity
Type
③Taping Dimensions
Standard Quantity[pcs]
◦Paper tape (0.315 inches wide)
Paper Tape
Embossed Tape
1608(0603)
2125(0805)
2012(0805)
2016(0806)
3216(1206)
4516(1806)
3225(1210)
4525(1810)
4532(1812)
4000
4000
4000
ー
ー
ー
ー
ー
ー
ー
ー
ー
2000
2000
2000
1000
1000
2000
Chip Cavity
Type
Insertion Pitch Tape Thickness
②Tape Material
A
B
F
T
FBMJ1608
FBMH1608
(0603)
1.0±0.2
1.8±0.2
4.0±0.2
1.1max
(0.039±0.008)(0.071±0.008)(0.157±0.008) (0.043max)
FBMJ2125
FBMH2012
(0805)
1.5±0.2
2.3±0.2
4.0±0.2
1.1max
(0.059±0.008)(0.091±0.008)(0.157±0.008) (0.043max)
Unit : mm(inch)
◦ Embossed tape (0.315 inches wide)
Insertion
Pitch
Chip Cavity
Type
Tape Thickness
A
B
F
K
T
1.8±0.2
2.2±0.2
4.0±0.2
2.6max
0.6max
FBMH2016
(0806)
(0.071±0.008)(0.087±0.008)(0.157±0.008)(0.102max)(0.024max)
1.9±0.2 3.5±0.2 4.0±0.2 1.5max 0.3max
FBMJ3216
(1206)
(0.075±0.008)(0.138±0.008)(0.157±0.008)(0.059max)(0.012max)
1.9±0.2 3.5±0.2 4.0±0.2 2.6max 0.6max
FBMH3216
(1206)
(0.075±0.008)(0.138±0.008)(0.157±0.008)(0.102max)(0.024max)
2.8±0.2 3.5±0.2 4.0±0.2 4.0max 0.6max
(0.110±0.008)(0.138±0.008)(0.157±0.008)(0.157max)(0.024max)
Unit : mm(inch)
FBMH3225
(1210)
◦ Embossed tape (0.472 inches wide)
Insertion
Pitch
Chip Cavity
Type
Tape Thickness
A
B
F
K
T
1.9±0.2
4.9±0.2
4.0±0.2
1.5max
0.3max
FBMJ4516
(1806)
(0.075±0.008)(0.193±0.008)(0.157±0.008)(0.059max)(0.012max)
1.9±0.2 4.9±0.2 4.0±0.2 2.6max 0.6max
FBMH4516
(1806)
(0.075±0.008)(0.193±0.008)(0.157±0.008)(0.102max)(0.024max)
2.9±0.2 4.9±0.2 4.0±0.2 4.0max 0.6max
FBMH4525
(1810)
(0.114±0.008)(0.193±0.008)(0.157±0.008)(0.157max)(0.024max)
3.6±0.2 4.9±0.2 8.0±0.2 4.0max 0.6max
(0.142±0.008)(0.193±0.008)(0.315±0.008)(0.157max)(0.024max)
Unit : mm(inch)
FBMH4532
(1812)
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
chipbeads_reli_e-01
chipbeads_reli-PRP1
■ PACKAGING
④Leader and Blank portion
φA
[mm](inch)
φB
[mm](inch)
W
Type
[mm](inch)
FBMJ1608
FBMJ2125
FBMJ3216
10.0±1.5
(0.394±0.047)
14.0±1.5
(0.551±0.059)
FBMJ4516
FBMH1608
FBMH2012
FBMH2016
FBMH3216
FBMH3225
FBMH4516
FBMH4525
+0
180
ー3
+1
60
ー0
+0
+0.039
(7.09
)
(2.36
)
ー0.118
ー0
10.0±1.5
(0.394±0.047)
⑤Reel size
14.0±1.5
(0.551±0.059)
330±2.0
(12.99±0.080)
100±1.0
(3.94±0.039)
14±2.0
(0.551±0.080)
FBMH4532
⑥Top tape strength
The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the
arrow as illustrated below.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
chipbeads_reli_e-01
chipbeads_reli-PRP2
■ RELIABILITY DATA
RECTANGULAR FERRITE CHIP BEADS (HIGH CURRENT) FB series M type
1. Operating Temperature Range
Specified Value
-40℃~+85℃
2. Storage Temperature Range
Specified Value
-40℃~+85℃
【Test Methods and Remarks】
*Note: 0 to +40℃ in taped packaging
3. Impedance
Specified Value
Within the specified tolerance
【Test Methods and Remarks】
Measuring equipment : Impedance analyzer (HP4291A) or its equivalent
Measuring frequency : 100±1 MHz
4. DC Resistance
Specified Value
Within the specified range
【Test Methods and Remarks】
Four-terminal method
Measuring equipment : Milliohm High-Tester 3226 (Hioki Denki) or its equivalent
5. Rated Current
Specified Value
Within the specified range
6. Vibration
Appearance
: No significant abnormality
Specified Value
Impedance change : Within ±30% of the initial value
【Test Methods and Remarks】
According to JIS C 0040.
Vibration type
Time
: A
: 2 hrs each in X,Y, and Z directions
Total: 6 hrs
Frequency range : 10 to 55 to 10Hz (/min.)
Amplitude
: 1.5 mm (shall not exceed acceleration 196m/s2)
Mounting method : Soldering onto PC board
7. Solderability
Specified Value
90% or more of immersed surface of terminal electrode shall be covered with fresh solder.
【Test Methods and Remarks】
Solder temperature : 230±5℃
Immersion time
Preconditioning
: 4±1 sec.
: Immersion into flux.
Immersion and Removal speed : 25mm/sec.
8. Resistance to Soldering Heat
Specified Value
Appearance
: No significant abnormality
Impedance change : Within ±30% of the initial value
【Test Methods and Remarks】
Preheating
: 150℃ for 3 min.
Resistance to Soldering Heat : 260±5℃
Duration
Preconditioning
: 10±0.5 sec.
: Immersion into flux.
Immersion and Removal speed : 25mm/sec.
Recovery
: 2 to 3 hrs of recovery under the standard condition after the test.
9. Thermal Shock
Specified Value
Appearance
Impedance change : Within
: No significant abnormality
+50
% of the initial value
ー10
【Test Methods and Remarks】
According to JIS C 0025.
Conditions for 1 cycle
Step
Temperature (℃)
-40±3℃
Room Temperature
Duration (min.)
30±3
Within 3
1
2
3
4
85±2℃
Room Temperature
30±3
Within 3
Number of cycles : 100
Mounting method : Soldering onto PC board
Recovery : 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
10. Resistance to Humidity (steady state)
Specified Value
Appearances
Impedance change : Within ±30% of the initial value
: No significant abnormality
【Test Methods and Remarks】
Temperature
Humidity
Duration
: 40±2℃
: 90 to 95% RH
+24
: 500
hrs
ー0
Mounting method : Soldering onto PC board
Recovery : 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
11. Loading under Damp Heat
Specified Value
Appearances
Impedance change : Within ±30% of the initial value
: No significant abnormality
【Test Methods and Remarks】
Temperature:40±2℃
Humidity:90 to 95%RH
Applied current:Rated current
+24
Duration:500
hrs
ー0
Mounting method:Soldering onto PC board
Recovery:2 to 3hrs of recovery under the standard condition after the removal from test chamber.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
chipbeads_reli_e-01
chipbeads_reli-PRP3
■ RELIABILITY DATA
RECTANGULAR FERRITE CHIP BEADS (HIGH CURRENT) FB series M type
12. High Temperature Loading Test
Appearance
: No significant abnormality
Specified Value
Impedance change : Within ±30% of the initial value
【Test Methods and Remarks】
Temperature:85±2℃
+24
Duration:500
hrs
ー0
Applied current:Rated current
Mounting method:Soldering onto PC board
Recovery:2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
13. Bending Strength
Specified Value
Appearance : No mechanical damage.
【Test Methods and Remarks】
Warp
: 2mm
Testing board : Glass epoxy-resin substrate
Thickness : 0.8mm
14. Adhesion of Electrode
Specified Value
No separation or indication of separation of electrode.
【Test Methods and Remarks】
Applied force : 5N
Duration
: 10 sec.
Note on standard condition: "standard condition" referred to herein is defined as follows:
5 to 35℃ of temperature, 45 to 85% relative humidity and 86 to 106kPa of air pressure.
When there are questions concerning measurement results:
In order to provide correlation data, the test shall be conducted under condition of 20±2℃ of temperature, 60 to 70% relative humidity and 86 to 106kPa of air pressure. Unless other-
wise specified, all the tests are conducted under the "standard condition."
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
chipbeads_reli_e-01
chipbeads_reli-PRP4
■ PRECAUTIONS
FBM Type
1. Circuit Design
◆Operating environment
1. The products described in this specification are intended for use in general electronic equipment, (office supply equipment, telecommunications systems,
measuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high
reliability (traffic systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where
product failure might result in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance.
◆Rated current
Precautions
1. Rated current of this product is shown in this catalogue, but please be sure to have the base board designed with adequate inspection in case of the
generation of heat becomes high within the rated current range when the base board is in high resistance or in bad heating conditions.
2. PCB Design
◆Land pattern design
Precautions
1. Please refer to a recommended land pattern.
3. Considerations for automatic placement
◆Adjustment of mounting machine
1. Excessive impact load should not be imposed on the products when mounting onto the PC boards.
Precautions
2. Mounting and soldering conditions should be checked beforehand.
Technical
consider-
ations
◆Adjustment of mounting machine
1. When installing products, care should be taken not to apply distortion stress as it may deform the products.
4. Soldering
◆Wave soldering
1. Please refer to the specifications in the catalog for a wave soldering.
◆Reflow soldering
1. Please contact any of our offices for a reflow soldering, and refer to the recommended condition specified.
◆Lead free soldering
1. When using products with lead free soldering, we request to use them after confirming adhesion, temperature of resistance to soldering heat, etc. sufficiently.
◆Preheating when soldering
Precautions
Heating : The temperature difference between soldering and remaining heat should not be greater than 150℃.
Cooling : The temperature difference between the components and cleaning process should not be greater than 100℃.
◆Recommended conditions for using a soldering iron
Put the soldering iron on the land-pattern.
Soldering iron's temperature - Below 350℃
Duration - 3 seconds or less
The soldering iron should not directly touch the inductor.
◆Wave, Reflow, Lead free soldering
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade the reliability of
the products.
Recommended reflow condition(Pb free solder)
Recommended reflow condition(Pb solder)
Peak 260℃ max
5sec max.
250
200
150
100
50
10sec max
250
230℃ min
240±5℃
220±5℃
180℃
150℃
200
150
100
50
180℃
150℃
30±10sec
Technical
consider-
ations
30±10sec
90±30sec.
Duration(sec)
90±30sec.
Duration(sec)
0
0
◆Preheating when soldering
1. There is a case that products get damaged by a heat shock.
◆Recommended conditions for using a soldering iron
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade the reliability of
the products.
5. Handling
◆Handling
1. Keep the inductors away from all magnets and magnetic objects.
◆Setting PC boards
1. When setting a chip mounted base board, please make sure that there is no residual stress to the chip by distortion in the board or at screw part.
Precautions ◆Breakaway PC boards (splitting along perforations)
1. When splitting the PC board after mounting inductors, care should be taken not to give any stresses of deflection or twisting to the board.
2. Board separation should not be done manually, but by using the appropriate devices.
◆Mechanical considerations
1. Please do not give the inductors any excessive mechanical shocks.
◆Handling
1. There is a case that a characteristic varies with magnetic influence.
◆Setting PC boards
Technical
consider-
ations
1. There is a case that a characteristic varies with residual stress.
◆Breakaway PC boards (splitting along perforations)
1. Planning pattern configurations and the position of products should be carefully performed to minimize stress.
◆Mechanical considerations
1. There is a case to be damaged by a mechanical shock.
6. Storage conditions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should
be controlled.
・Recommended conditions
Precautions
Ambient temperature 0~40℃
Humidity
Below 70% RH
The ambient temperature must be kept below 30℃. Even under ideal storage conditions, solderability of products electrodes may decrease as time passes.
For this reason, inductors should be used within 6 months from the time of delivery.
Technical ◆Storage
consider-
ations
1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of
taping/packaging materials may take place.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
chipbeads_reli_e-01
chipbeads_reli-PRP5
相关型号:
FBMJ4516HM900-T
Ferrite Chip, 1 Function(s), 4A, ROHS COMPLIANT, EIA STD PACKAGE SIZE 1806, 2 PIN
TAIYO YUDEN
FBMJ4516HM900-TV
Chip Bead Power Inductors for Automotive (BODY & CHASSIS, INFOTAINMENT) / Industrial Applications (FB series M type)[FBMJ]
TAIYO YUDEN
FBMJ4516HM900-TV_V01
Chip Bead Power Inductors for Automotive (BODY & CHASSIS, INFOTAINMENT) / Industrial Applications (FB series M type)[FBMJ]
TAIYO YUDEN
FBMJ4516HS111-TV_V01
Chip Bead Power Inductors for Automotive (BODY & CHASSIS, INFOTAINMENT) / Industrial Applications (FB series M type)[FBMJ]
TAIYO YUDEN
©2020 ICPDF网 联系我们和版权申明